CIRCULAR BACKSHELLS & ADAPTORS

It is very unusual for high performance connector applications not to require the use of a backshell / adapter or other connector accessory. So, along with most types of circular connectors, we can complete your application with a wide range of backshells, adapters and accessories.

As you can see, these are manufactured by Weald Electronics, Polamco and Glenair. Elsewhere on this site, you will find full details of HellermannTyton’s comprehensive selection of heat shrink products.

Weald’s new LMA19 series of backshells are designed for use with MIL-DTL-26482 Series 1 and MIL-DTL-38999/D38999 Series III and IV connector systems. These are sealing and strain relief backshells  which provide full cable support to prevent bending and overflexing as well as protection against the ingress of water and dirt when used with a heat shrink boot. We have standard backshells in many sizes and finishes available for immediate dispatch from our extensive stockholding with no minimum order quantity or value. 

WEALD ELECTRONICS LMA19 Backshells for MIL-DTL-26482 Series 1 and MIL-DTL-38999 Series III and IV Connector Systems

• Compatible with MIL-DTL-38999 / D38999 Series III and IV or MIL-DTL-26482 Series I circular connectors 
• Provide strain-relief and cable support to prevent bending or overflexing 
• Overall 360° screening against EMI/RFI interference 
• Protect the effectiveness of the cable, sealing against water and dirt ingress 
• Two-part components allow uncoupling for repairs without damaging the boot 
• Many sizes and plating finishes available from stock 
• Tool-free constant force spring or band strap provided

Product Info at Weald Electronics

TE Connectivity/POLAMCO Accessories for all Standard Military Circular Connectors

• Non screened and screened circular adaptors
  • Machined from solid material
  • Straight, 45° and 90° options
  • Compatibile with MIL-Spec dimensions and performance
• Heat Shrink Kits
  • For screened and unscreened options
  • High screening performance (90dbs to 300MHz)
• Protection Covers, Blanking Caps and Dummy Receptacles 

TE Connectivity/Polamco Part Numbers

GLENAIR Accessories Suitable for a Wide Variety of Connectors

• Manufactured by Glenair
• Shrink boot adapters   
• Shorting cap backshells
• Extender and transition backshells   
• G-Spring backshells
• Environmental and non-environmental backshells  
• Qwik-Ty strain reliefs  
• EMI/RFI backshells both environmental and non-environmental
• Banding and crimp ring screen termination backshells  
• Backshells without strain relief 

Glenair part numbers 

WEALD ELECTRONICS Accessories for MIL-DTL-5015 (LMJ/MG Range) and MIL-DTL-26482 (LMH Range) Military Circular Connectors

• Strain relief cable clamps
• J sealing glands
• A endbell adaptors
• Grommet nuts
• 360˚ screened cable terminations

Weald Electronics MG Range part numbers
Weald Electronics LMJ Range part numbers