LMA19/20/67 SERIES CIRCULAR CONNECTOR BACKSHELLS
It is very unusual for high performance connector applications not to require the use of a backshell / adapter or other connector accessory. So, along with most types of circular connectors, we can complete your application with a wide range of LMA backshells manufactured by Weald Electronics. Elsewhere on this site, you will find full details of HellermannTyton’s comprehensive selection of heat shrink products.
Weald’s new LMA series of backshells are designed for use with MIL-DTL-26482 Series 1 and MIL-DTL-38999/D38999 Series III and IV connector systems. These are sealing and strain relief backshells which provide full cable support to prevent bending and overflexing as well as protection against the ingress of water and dirt when used with a heat shrink boot. We have standard backshells in many sizes and finishes available for immediate dispatch from our extensive stockholding with no minimum order quantity or value.
LMA19H/D and LMA23H Backshells for MIL-DTL-26482 Series 1 and MIL-DTL-38999 Series III and IV Connector Systems
LMA19_91H_91D_MIL-DTL-26482_38999_Circular_Connector_Backshells_Adaptors2.jpg

- Compatible with MIL-DTL-38999 / D38999 Series III and IV (H interface) or MIL-DTL-26482 Series I / LMH (D interface) circular connectors
- Straight and angled / 90 deg. (angled) variants
- Made of Aluminium, Stainless Steel or Nickel Aluminum Bronze
- Provide strain-relief and cable support to prevent bending or overflexing
- Overall 360° screening against EMI/RFI interference
- Protect the effectiveness of the cable, sealing against water and dirt ingress
- Two-part components allow uncoupling for repairs without damaging the boot
- Many sizes and plating finishes available from stock
- Tool-free constant force spring or band strap provided
- Available in and standard and extended versions (LMA23H Series)
LMA20H Backshells for MIL-DTL-38999 Series III and IV Connectors with Fibre Optic Contacts - NEW PRODUCT, FURTHER DETAILS ON REQUEST
LMA20_MIL-DTL-38999_ELIO_8D_Fibre_Optic_Circular_Connector_Backshells_Adaptors2.jpg

-
Compatible with D38999 Series III Fibre Optic circular connectors
-
Made of Aluminium, Stainless Steel or Nickel Aluminum Bronze
-
Provide strain-relief and cable support to prevent bending or overflexing
-
Protect the effectiveness of the cable, sealing against water and dirt ingress
-
Two-part components allow uncoupling for repairs without damaging the boot
LMA67H/D Ultra Low Profile Backshells for MIL-DTL-26482 Series 1 and MIL-DTL-38999 Series III and IV Connector Systems - NEW PRODUCT, FURTHER DETAILS ON REQUEST
LMA67_76H_76D_MIL-DTL-26482_38999_Low_Profile_Heat-Shrink_Boot_Circular_Connector_Backshells_Adaptors.jpg

- Compatible with MIL-DTL-38999 / D38999 Series III and IV or MIL-DTL-26482 Series I and VG96912 circular connectors
- Made of Aluminium, Stainless Steel or Nickel Aluminum Bronze
- Low profile design to save space and weight
- Provide strain-relief and cable support to prevent bending or overflexing
- Protect the effectiveness of the cable, sealing against water and dirt ingress
Product Info at Weald Electronics
Accessories for MIL-DTL-5015 (LMJ/MG Range) and MIL-DTL-26482 (LMH Range) Military Circular Connectors
MIL-DTL-26482_5015_Circular_Connector_Backshells_Adaptors6.jpg

- Strain relief cable clamps
- J sealing glands
- A endbell adaptors
- Grommet nuts
- 360˚ screened cable terminations
More information in catalogues and datasheets below...
Products unavailable online
ASK FOR QUOTE