News
Sam 'Ups The Ante' As He Returns To Racing
February 2017
You may remember that our sponsored bike rider Sam Osborne had to stop racing just after the season’s start last year after being diagnosed with Post-Concussion Syndrome. He sustained a head injury during a crash at a testing session at the end of 2015, the consequences of which only became apparent a few months later. Now, Sam is on course to return to racing in 2017 and will compete on a bigger bike.
D-Subminiature Connectors are Sealed Against Harsh Environments
February 2017
We are happy to announce several new ranges of environmentally-sealed D-Subminiature connectors designed for use in those applications where enclosures need to be protected against the effects of dust, splashing water, rain and limited water immersion.
Circular Connectors for Demanding Industrial Applications from Lane Electronics
February 2017
The UK-made LMH series of bayonet coupling circular connectors, manufactured by Weald Electronics, are ideally suited for demanding environmental applications including those found across many industry sectors.
Adding Value to Our Custom Connector Solutions Keeps the Customers Coming Back
January 2017
FC Lane's Managing Director Simon Hammerton discusses our client's need for unique electrical connector solutions, such as customer-specific fibre-optic cable assemblies, that are always in high-demand and for which we are always increasing our capacity.
MIL-DTL- 38999 Circular Connectors Now Available in Many Shell Materials, Finishes and Contacts
December 2016
As a leading distributor of electrical and electronic connector products we are able to supply a range of circular connectors that meet the requirements of MIL-DTL-38999 SERIES III, making them suitable for a wide variety of demanding applications.
Pay Us a Visit at Autosport Engineering 2017
December 2016
Once again, we are exhibiting at the Autosport Engineering show which takes place at Birmingham’s NEC starting January 12th.
Lane Electronics Now Has More ITWMcMurdo Connectors Ranges For Immediate Delivery
December 2016
We significantly increased our ITWMcMurdo Connectors inventory and now have available for immediate dispatch more connector ranges than ever before including the popular M200 and Red Range, as well as the 801 Series PCB connector system.
It's Been A Good Year for LU Motorsport
November 2016
As we've reported before, each year LU Motorsport (Loughborough University Motorsport) develops, builds, tests and races a new single seat race car. From CAD to test circuit, these vehicles are designed from a blank sheet of paper, with the knowledge and expertise from over a decade of racing experience.
Cable and Chassis Connectors for Professional Audio and Lighting Applications
October 2016
The Neutrik XLR series of cable and chassis electrical connectors were designed for use in professional audio and lighting systems and are also used in many industrial applications.
New Two-Part PCB Connector from Lane Electronics Meets BS9525 F0033
October 2016
We have made available a two-part, high density PCB connector series for board-to-board or cable-to-cable applications where high resistance to vibration and extreme reliability are paramount.
Circular LMH Series Connectors to MIL-DTL-26482 with Black Zinc Nickel Finish Now Available
October 2016
Circular LMH Series Connectors to MIL-DTL-26482 with Black Zinc Nickel Finish Now Available.
Connectors for Use in Harsh Environments Need Careful Selection
September 2016
The ever increasing use of sophisticated electrical and electronic products and systems in areas such as mining and construction as well as applications in offshore installations including wind farms and oil and gas platforms has meant the development of specialist cabling and connector products for this type of environment.
Loughborough University Unveils 2016 Formula Student Car
August 2016
Last year we told you about our involvement with Loughborough University and its exciting racing car project which did so well in last year’s Formula Student competition. You may remember Lane Motorsport provided a variety of Souriau 8STA connectors for use throughout the car.
Sam Plans a Racing Return in Time for Next Season
July 2016
As we reported back in May, our sponsored rider Sam Osborne had to pull out of this year’s Thundersport GB Series after just three rounds. The reason? Sam was diagnosed with Post-Concussion Syndrome after sustaining a head injury during a crash at a testing session late last year.
Heat Shrink Boots for Backshell to Cable Transitions Now Available
July 2016
We have now made available a wide range of heat shrinkable boots designed for strain relieving applications where motorsport connectors have integral backshell and other connector designs use boot adaptor backshells to save weight to cable transitions, as well as in other areas where insulation and component protection are key requirements.
Industrial Rack and Panel Connectors Perfect for Blind Mating Applications
July 2016
We are very happy to announce the Red Range of rugged industrial rack and panel connectors suitable for use throughout industry in blind mating applications to our current range of connector solutions.
Protective Caps for MIL-DTL-38999 and 26482 Circular Connectors from Lane Electronics
July 2016
We are happy to announce a new range of protective caps designed for high performance circular connectors that meet the requirements of MIL-DTL-38999 and MIL-DTL-26482.
Choice and Next Day Delivery are Still Key Customer Requirements with Online Shopping Growing Fast
July 2016
Not surprisingly, managing our stock profile to ensure it continues to reflect what the industry needs has been a key part of our strategy since the company was formed back in 1966. As we move through our 50th year, we maintain a product and parts inventory worth several million pounds which means we are virtually always able to meet our customers’ demands for choice and delivery.
UK-Made MIL-DTL-26482 Circular Connectors for Demanding Industrial Applications
June 2016
The LMH series of bayonet-coupling circular power connectors from UK manufacturer Weald Electronics meets the requirements of MIL-DTL-26482 Series 1 and Patt 105. The connectors are manufactured in accordance with BS9522 F0017 and BS/CECC 75201-003.
Mains Power Circular Connectors for Battery Powered Vehicles
June 2016
We have made available a range of mains power circular connectors manufactured in the UK by Weald Electronics. The LMV range is produced to IEQC-CECC spec BS/CECC 75201-004 which includes the safety requirements of BS EN 60950 for safe use in mains applications and CE marked assemblies including the on-board charging of electric vehicles.