Please choose a page number: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

COVERS

*Clicking on each diagram will open a window with a larger image.

For use with Guides N2, R2, CN2, CR2 see intermatability chart



Maximum
Dimensions		 17* 29* 33 41* 53* 65*
D 42.50 57.70 63.00 73.00 88.20 103.50
E 25.80 41.00 46.10 56.30 71.50 86.80
*Including equivalent combined l.f./h.f. sizes (see order codes page 16)

The Mk 2 connector covers offer the advantages of the following facilities:
  1. Top (T) or side (S) cable entry (with cable clamp).
  2. Flat cable top entry.
  3. Full pin shroud/partial pin shroud for p.c.b. interfacing/no pin shroud, as required.
  4. May be stacked on a 10.16mm pitch
  5. May be used with l.f. and h.f. contacts.

PIN SHROUDS

(BS Style A5117 Not approved)


SIZE B X Y
17 WAY 30.48 42.65 40.64
29 WAY 45.72 57.85 55.88
33 WAY 50.80 62.95 60.96
41 WAY 60.95 73.15 71.12
53 WAY 76.20 88.35 86.36
65 WAY 91.44 103.65 101.60
72 WAY 106.68 118.85 116.84
84 WAY 121.92 134.05 132.08
96 WAY 137.16 149.35 147.32


For p.c.b. mounting, when cross holes cannot be utilised for attachment of pin protector to body, pegs to be inserted into p.c.b. and secured by applying sufficient heat and pressure to spread end of pegs.

Note: Each pin shroud is supplied as a kit comprising the mould, 2 longer replacement screws and fitting instructions.
Please choose a page number: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16